设计原理
Design principle
整个柜体采用的1.2毫米～2.0毫米SPCC钢板经裁剪、冲压、折弯、铆接、焊接、打磨、校形、除油、除锈、磷化、静电喷涂、高温固化、冷却等制作而成。产品可分为组装式和焊接式两种。组装式加工难度高但运输成本低，焊接式加工难度低但运输成本高。①台面高度为700毫米，深底为350毫米。适合操作员在坐姿操作时双腿能伸入台面下部且不会因为碰到柜体而伤到腿；②台面配有推拉式键盘抽屉，预留有鼠标线孔。有利于操作台面的井然有序；③每联柜体后上部配有交流散热风扇一套（风扇、风扇罩、1米电源线，已组装好），后门（可锁）预留有散热通风孔。有利于柜体内部产生循环风而达到散热功能，后门便于检修柜体内的设备；④柜体下部（底板后部与下部）预留有进出线孔位便于走线；⑤柜体下部配有可调节层板一件，转动前门（可锁）。层板便于放置卧式主机或其它设备，前门便于打开操作设备；⑥整个柜体为一把钥匙打开；⑦柜体上部（平台式除外）首层为倾斜面，与台面夹角为105度，从第二层起与台面夹角为90度。有利于操作员在长时间目视画面时眼睛不疲劳；⑧柜体上部（平台式除外）配有可调节显示器层板一件，可拆卸活动前面板一件。前面板有利于更换显示器时不用更换柜体而只更换面板；⑨台面与柜体为组合式（平台式除外）更有利于运输；⑩颜色任意搭配（通常为电脑灰），使整个柜体实用美观。
The whole cabinet put oneself in another's position is made of 1.2 mm to 2.0 mm (SPCC) of steel plate after cutting, punching, bending, riveting, welding, grinding, the school form, oil removal, rust removal, phosphating, electrostatic spraying, high temperature curing, cooling, etc.Products can be divided into packaged and welding type two kinds.Packaged processing difficulty is high but the transportation cost is low, welding processing difficulty is low but the transportation cost is high.1) mesa height is 700 mm, deep bottom is 350 mm.Suitable for operators in the sitting position operation legs can stretch into mesa bottom and don't because of touching the cabinet put oneself in another's position and hurt leg;(2) the table with a push-pull type keyboard drawer, mouse line hole is reserved.Is advantageous to the work station of the orderly;(3) each part cabinet put oneself in another's position after the upper is equipped with ac cooling fan is a set of (fan, fan cover, 1 meter power supply cord, has been assembled), the back door (lock) set aside the cooling vents.Is advantageous to the cabinet put oneself in another's position inside produce wind circulation and achieve the cooling function, the back door is convenient for maintenance equipment within the cabinet put oneself in another's position;(4) cabinet put oneself in another's lower back (bottom and bottom) into the outlet hole is reserved to go line;(5) lower part of cabinet put oneself in another's position is equipped with adjustable layer board a, turn the front door (lock).Facilitate set horizontal layer board host or other devices, open the front door is convenient for operating equipment;6. The entire cabinet put oneself in another's position is a key to open;7 upper cabinet put oneself in another's position (except platform) as the rake face, the first layer and mesa Angle of 105 degrees, starting from the second floor and mesa Angle of 90 degrees.Is advantageous to the operator the eye in the visual image for a long time without fatigue;Except upper end cabinet put oneself in another's position (platform) is equipped with adjustable display layer board, a front panel with a removable activities.The front panel to replace the display without replacement cabinet put oneself in another's position and just change the panel;Pet-name ruby mesa and cabinet put oneself in another's position is modular (except platform) is more advantageous to transport;Attending color combinations (usually a computer grey), make the whole cabinet put oneself in another's position, practical and beautiful.
